Single Projection Control (Extron)

Question

How do I use the control panel in a single projection Extron system?

Answer

Projector

• Press the ON button for the video projector. ON will begin to flash.
• There is no sound from the speakers until the ON button is pressed.

 PC 

• Press the PC button on the control panel.
• Make sure the computer is turned on; the unit is installed below the keyboard. Check if the power button is lit.
• Make sure the monitor is tuned on, the lower right button should be lit.

VGA

• Press the VGA button on the control panel.
• Connect the 15 pin VGA cable between the laptop and the input port on the podium.
• Connect the 3.5mm audio cable between the laptop and the audio jack on the podium.
• If the laptop is showing a different image between the laptop and projector, press Win + P and select Duplicate
• If using a Mac Book, press Cmd + F4 to start mirroring

HDMI

• Press the HDMI button on the control panel
• Connect the HDMI cable between the laptop and the input port on the podium.
• Some laptops require an adapter to be attached to the HDMI cable before it can be attached to the laptop
• If the laptop is showing a different image between the laptop and projector, press Win + P and select Duplicate
• If using a Mac Book, press Cmd + F4 to start mirroring

Document Camera

• Press the DOC CAM button on the control panel.
• Make sure the power light is lit blue on the document camera.
• If the image is too dark, turn the light on the document camera.
  • Samsung document cameras have a light power button at the base of the unit.
  • Elmo document cameras have a light power button at the top of the unit close to the camera.
• The image can be zoomed in to enlarge the picture.
  • Samsung document cameras have buttons for zooming in/out at the base of the unit.
  • Elmo document cameras have a dial that can be rotated at the top of the arm.

DVD/BluRay Player

• Press the DVD button on the control panel.
• Use the DVD remote control to navigate the onscreen menu.
• Use the play, stop, pause, ff, or rr buttons to control the disc.

Speaker Volume

• To adjust the speaker volume, turn the volume knob slowly up or down.
• Light indicators should move up/down representing the current level.

A/V Mute

• Press the A/V MUTE button to turn the projector image on/off and mute the audio.
• If this button is flashing RED, the projector image and audio are muted.